Step by step to install doors in block with your own hands

Would you know how to put doors in block? This is a task that can be done perfectly well with our own hands. and without resorting to professionals, which can make the process considerably cheaper. In fact, the doors in block are those that come in a pack ready to assemble, including most of the materials you will need.

We are talking about a pack that includes from the door leaf itself, to the frame and hinges already pre-installed. In addition, it is an element prepared to be installed in any direction, which means that you can decide in which direction the door will open once you have purchased it. Now let ‘s learn how to install block doors, step by step.

Materials and tools needed to install block doors

In addition to the pack in which all the elements are included, where you will find the door, the frame and the hinges, you will also need materials such as mounting adhesive, nails and screws, polyurethane foam and some stops and shims to make sure that the door installation is perfectly straight and level.

On the other hand, to install doors in blocks, you need to have a number of tools on hand, such as miter saws, screwdrivers, a hammer, a spirit level or laser level, a tape measure, carpentry saws, and a utility knife or scissors. It is essential that you have all of this before you begin the process so that you can do everything without interrupting the process.

How to install block doors step by step

Once you have all the materials and tools we have mentioned at hand, it is time to start the process. Remember that, although installing block doors is not a complex task, it is very important that you follow all the steps in the right order, otherwise the final result may not be as expected.

1. Remove the old door from its place.

When you remove the old door you will find a pre-frame. It is recommended that this step of the process be carried out before purchasing your new door, so that you can take measurements to ensure that you purchase the correct size that will fit the pre-frame. At this point you should remove the old leaf by lifting off the hinges and then remove the frame and the frame.

2. Make sure that the pre-fence is perfectly level and place the fence.

To install gates in block it is essential that the pre-frame is perfectly level beforehand, so we must make sure of it using a level or a square. Once you have checked that it is centered, it is time to install the temporary frame. To do this, you must adjust it to the hole and fit it with wedges, which you will insert between the new frame and the pre-frame.

3. Install the new door frame securing the measurements

Once we have the frame in place and fitted with the pre-frame, we must proceed to its final installation. To do this, we recommend replacing the screws included in the hinges with longer lag screws to anchor the three elements: hinges, frame and pre-frame.

Next, it is time to seal this joint. To do this, we must cut the wedges and leave them flush with the pre-frame so that they are not visible, and fill the space with polyurethane foam. Allow the foam to dry and trim off any excess once it has settled—remember that this is a product that expands naturally.

In many cases—practically most—the frame of block doors does not cover the entire pre-frame, so it is important to buy a frame or trim of the appropriate size and, of course, in the same color and decorative style as the rest of the pack. To install it, simply nail it to the fence.

4. Position the door handles

The most complex part of the installation is now complete. At this point, you only need to prepare the door leaf so that it can be fitted together with the block. To do this, it is very important that you install the handle correctly, which is not difficult, as the pack includes all the necessary materials. It is simply a matter of screwing it in and checking that it works properly.

5. Screw on the hinges and install the door in the frame.

The same is true of the hinges. Remember that you have already screwed the first part to the door frame, so you only have to attach the other part to the door leaf.

In this step it is very important that you place them at the correct height, something that will not be the slightest problem, since the holes are usually already made -sometimes they are already screwed in place-. From here, you only have to assemble both parts of the hinges to have the door installed.

6. Check all the elements and make sure that everything fits tightly.

Finally, it is time to check the whole process to verify the result. Check that the handle works smoothly and that it fits perfectly with the door frame, that when opening and closing the leaf there is no sound or jamming at any point and, if so, you have done a perfect job. If not, it is simply a matter of finding the error and correcting it by following these steps again.

How to install block doors and make them look perfect

As you have been able to see in the step by step in which we have explained the process, it is not a very complex task, but it does require special care to ensure that the final result is adequate. When installing doors in block, it is very important that you can check that each piece has been perfectly installed at the time of doing so, so that a punctual defect does not harm in the following steps.

One of the advantages of installing doors in block is that the main elements you will need are included in a set, which makes the installation much easier with respect to the measurements. You will only have to check the exact size of the opening to be able to buy a block that fits perfectly and check that the subframe is completely level.