If you run any kind of physical business in which you sell any type of products or services, surely at some point you have thought that your shop window was missing something to attract the attention of potential customers. For example, a differential decorative element that gives meaning and visibility to the brand can be very interesting, but do you know how to put a decorative vinyl on a glass?
It is a simpler task than you think, and perhaps you have not dared to place it precisely because you think it will not look good. However, by following certain steps when it comes to placing it, it is practically impossible for the result to be negative. Surely at this moment you are going through your head thousands of designs, you are about to learn how to put a vinyl on a glass!
In today’s article we explain how to do it, but it is not something that is only useful for shop windows. Although it is not very common, the windows of your home can also get a lot of personality by putting a vinyl that fits the rest of your decor. Regardless of what your case is, today’s article will be of great help.
How to put a vinyl on the wall with the right materials
Learning how to put a vinyl on the wall is simple. Complications may arise, in any case, when it comes to doing it properly. to achieve the two main objectives of this task: to keep it looking like new and durable, and to make it look perfect aesthetically. In our step by step we tell you how to do it.
How to put a vinyl on glass step by step
To achieve these results we must avoid, above all, internal bubbles and poorly glued edges. Generally, if we can prevent the former from happening when we put vinyl on glass, we will greatly reduce the chances of the latter.
Why? Because gluing problems usually appear, if the product is of high quality, when we manipulate the vinyl too much, and this is something that often happens if we have made mistakes -which usually result in bubbles- in the first instance.
Clean the surface where the vinyl will be applied
For the final result when putting a vinyl on a glass to be optimal at all levels, you must ensure that the surface is completely clean. To do this, use your usual glass cleaning methods, but do not forget to finish the process with a spotless cloth dampened with alcohol.
Mix soapy water and spray the glass.
Before taking this step it is important that you take measurements on the surface. You must have controlled the size of the vinyl that you are going to paste and, after calculating the size on the glass, place some kind of guide to ensure that it is straight. Now you should spray the entire surface with soap and water to ensure proper adhesion.
Peel the protective paper from the vinyl
At this point in the process , it is time to peel off the protective paper from the area of the vinyl containing the glue. To do this without wrinkling, folding or sticking to itself, we recommend placing it upside down on the surface where you will place it -that is, glue side out- and pull the protective paper gently, slowly and diagonally.
Sprays the adhesive side of the vinyl
Once the protective paper is removed, the next step is again to spray with soap and water, although in this case we are not talking about the surface where the vinyl will be placed, but on the side where the glue is located. Remember that this will help you to turn the product without sticking where it should not.
Turn it over carefully
And if so far we have asked for delicacy throughout the process, in this case you must increase the level, since it is the most propitious moment for the vinyl to suffer damage. With all the care in the world turn it to place it on the glass, for which we recommend you ask for help and that, in case of doing it individually -if the product is large it will be impossible-, take it from the upper corners. If you have logistical support, the ideal is to take it from the four corners to turn it over.
How to put a vinyl on glass without bubbles
The most important step throughout the whole process of how to put a vinyl on a glass, is the time of gluing. Place it following the guides that you had previously marked and take advantage of the fact that you have sprayed both parts with soap and water to slide it little by little until it reaches the place you had chosen to place it.
Finishing touches to glue the vinyl
To make it perfectly adhered and without bubbles, pass a spatula making movements from the center of the vinyl towards the ends. Again, remember to slide carefully so as not to perforate or tear the product, and if it is a print vinyl, it is essential that you cover the ends of the spatula in some way, since in this case there are more chances of damaging it.
Why do you need to learn how to put vinyl on glass?
We believe that visibility is essential for any business. Regardless of whether it is a large chain or a neighborhood store, that potential customers identify the brand is a big step to generate sales, and this is something that has a lot to do with customization. If you know how to put a vinyl, you’re a long way down the road in this regard.
Keep in mind that, although you can hire someone to do it for you, beyond the economic savings that you can suppose to place the vinyl with your own hands, you can place it exactly where you want to do it. The downside? Now you will have no one to blame if the final result is not as good as you expected, but this is something that will not happen if you follow our advice.
