Hand tools for construction, carpentry, gardening…

Q: What are the best tools for working with plasterboard?

Plasterboard is a laminated gypsum panel, widely used for building partitions, ceilings, and interior cladding. To work with it efficiently, the best tools include: Hand saw: First, mark the desired cut on the plasterboard. Secure the panel firmly and place the saw on the edge of the marked line. Apply consistent pressure, cut along the mark, control your speed, and avoid sudden movements until the cut is complete. Utility knife: Similar to the hand saw, mark the area to be cut first, then make a gentle incision with the knife, repeating several times to deepen the cut. Metal rasp: Use with care, only to smooth the edges of the gypsum board. Incorrect use can compromise the integrity of the panel. Do not use on flat surfaces. Corner trowel: Place the corner trowel against the plasterboard angle, apply light pressure, and slide along the corner, keeping constant contact with the surface. Make smooth, controlled movements to cover the entire area. Trowel: To remove excess material from the panels, use a trowel to level or scrape gently without damaging the board.

Nuevo buscador

324 products

Metallic Raspin Bellota 4107 Interchangeable Blades 260mm

Receive it between 6 and November 9.

Before: €23.41

€22.24

-5%

Tax included

American Spatula Bellota 5900 Bimaterial Stainless Steel 180mm

Receive it between 6 and November 9.

Before: €6.75

€6.41

-5%

Tax included

Stillson 6600-8 Key

Receive it between 10 and November 12.

Before: €20.59

€19.56

-5%

Tax included

Titanium Bimaterial Cutter Bellota 51406 18mm

Receive it between 10 and November 12.

Before: €19.08

€18.13

-5%

Tax included

Porcelain stoneware pliers

Receive it between 9 and November 10.

Before: €45.06

€42.81

-5%

Tax included

RUGOSA rubber-foam heel 28x14cm PRO

Receive it between 6 and November 9.

Before: €8.81

€8.37

-5%

Tax included

Straight stainless steel stainless steel trowel 30x12cm

Receive it between 6 and November 9.

Before: €12.05

€11.45

-5%

Tax included

Cortafrías Rubi

Receive it between 9 and November 10.

Before: €12.33

€11.71

-5%

Tax included

Hammer 8007-C

Receive it between 9 and November 10.

Before: €20.95

€19.90

-5%

Tax included

Pliers For Porcelain And Stoneware

Receive it between 10 and November 12.

Before: €31.74

€30.15

-5%

Tax included

Metallic rasp Bellota 4107 interchangeable blades 140mm

Receive it between 6 and November 9.

Before: €16.02

€15.22

-5%

Tax included

Corner Spatula Bellota 5896R Stainless Steel

Receive it between 6 and November 9.

Before: €13.95

€13.25

-5%

Tax included

Showing 1-12 of 324 item(s)

What do you need to know about Hand tools?

Equipping yourself with top-quality hand tools is essential for carrying out bricklaying, carpentry and finishing work with absolute precision, ergonomic control and maximum safety in the workplace.

Advantages of hand tools in the construction industry

Hand tools stand out for offering exceptional tactile control in high-precision tasks where machinery is too rough. Using robustly manufactured tools ensures a reliable mechanical response, reduces vibration in the hands and optimises the effort required for each movement.

When preparing mixes and mortars, tools such as bricklayer’s trowels, mixing trowels and stainless steel trowels ensure a homogeneous mix and uniform application. Their resistance to bending and corrosion ensures consistent professional performance in high-humidity environments.

For precise cutting and fitting work in traditional bricklaying, chisels, chisels and rubber mallets allow blocks to be shaped and ceramic tiles to be laid without damaging them. Ergonomic handles absorb the impact of blows, preventing joint injuries during long working days.

Types of hand tools for finishing and tiling

During the tiling and flooring process, notched trowels and rubber trowels make it easier to spread the adhesive and subsequently grout the tiles. Using tools of the correct size for the tile format ensures optimal coverage of the tile adhesive beneath each tile.

Similarly, when installing plasterboard and carrying out interior finishing work, hand saws, corner spatulas and rasps allow joints to be bevelled and finished to perfection. These tools ensure a smooth, uniform finish ready for subsequent painting.

Finally, proper maintenance of hand tools through systematic cleaning after each working day significantly extends their service life. Storing tools free from mortar residue and oiling wooden or rubber handles preserves their functionality for decades of use.

Essential hand tools on site

Trowels and notched trowels for the even application of adhesives.
Trowels, chisels and hand cutters for fitting ceramic tiles.
Spatulas, rasps and hand saws for plasterboard partition walls.
Spirit levels, plumb lines and tape measures for precise marking out.

Preguntas frecuentes

What are the best tools for working with plasterboard?

Plasterboard is a laminated gypsum panel, widely used for building partitions, ceilings, and interior cladding. To work with it efficiently, the best tools include:

Hand saw: First, mark the desired cut on the plasterboard. Secure the panel firmly and place the saw on the edge of the marked line. Apply consistent pressure, cut along the mark, control your speed, and avoid sudden movements until the cut is complete.
Utility knife: Similar to the hand saw, mark the area to be cut first, then make a gentle incision with the knife, repeating several times to deepen the cut.
Metal rasp: Use with care, only to smooth the edges of the gypsum board. Incorrect use can compromise the integrity of the panel. Do not use on flat surfaces.
Corner trowel: Place the corner trowel against the plasterboard angle, apply light pressure, and slide along the corner, keeping constant contact with the surface. Make smooth, controlled movements to cover the entire area.
Trowel: To remove excess material from the panels, use a trowel to level or scrape gently without damaging the board.

Best sellers

SUPERPRO float replacement

Receive it between 10 and November 12.

Before: €6.28

€5.97

-5%

Tax included

SUPERPRO special grout sponge

Receive it between 6 and November 9.

Before: €2.31

€2.20

-5%

Tax included

Rubber trowel for joints 24 cm

Receive it between 6 and November 9.

Before: €7.94

€7.54

-5%

Tax included

SUPERPRO Mixed Sponge 20x13x7cm

Receive it between 6 and November 9.

Before: €3.87

€3.68

-5%

Tax included

Controller	Grupo Unamacor S.L.
Controller address	C\Ingeniero Iribarren s/n (Pol.Ind.La Torrecilla) - 14013 Córdoba
Purpose	Your data will be used to handle your requests, provide our services and send you commercial information related to our products if you accept.
Advertising	We will use this information for our own advertising purposes, not those of third parties.
Legal basis	We will only process your data with your prior consent, which you may withdraw at any time.
Recipients	Your data will be processed securely in the databases of Grupo Unamacor S.L. They will not be shared with third parties except where legally required.
Rights	You have the right to restriction, portability and to withdraw consent at any time, as well as to access, rectify or erase your data by writing to the controller.
Retention period	Your personal data will be kept for 2 years from the last interaction or until you withdraw consent.