Characteristics
How SB POOL SEALER works: It is a chemical product specially formulated to seal water leaks or leaks from swimming pools, spas, pipes etc. The product comes in a 1 L format and is applied in solution with 80 m3 of water. It is added by the skimmers and the selector valve is placed in "recirculation" mode for a minimum of 24-48 hours, the product crystallizes when it comes into contact with the air and seals the leak
Sealer can be applied to any type of pool, spas, etc., regardless of the material used in its construction: concrete, paint, fiberglass, liner, acrylic, etc.
Works equally well with the most common materials in pipe manufacturing (e.g. PVC, ABS, Copper, Steel, etc.)
Sealer does not deteriorate the interior of swimming pools, spas, etc.
It is a corrosion inhibiting agent
Metal-free
Packaging: 1L bottle
Appearance/Color: Viscous Liquid White
Density (at 20ºC): 1,393 - 1,396 grs/cm3
pH (at 20ºC): 11 - 11.5
Yield: 1L Sealer per 80m3 of water
NOTE: In case of using a concentration greater than 5L of product per 80m3 of water, it is recommended to change the water before using the pool, spa, etc.
How to use:
Completely fill the pool, spa, etc.
For pools with a flint or diatom filter, put the valve of the filtration system in the "recirculation" position. For pools with other types of filters, it is recommended to remove the filter elements or to bypass the filter before adding.
ALWAYS shake the bottle before use.
Start the filtration system and slowly add the recommended dose by the skimmers or, in overflow pools, directly to the pool near the discharge nozzles to facilitate the homogenization of the product
The product is very dense and has a tendency to deposit quickly at the bottom of the pool. To avoid this, it is recommended to remove the area where it has been deposited using a brush
Adjust the valves of the filtration system to concentrate the suction from the sump (pisc. with skimmers). Keep the filtration system running - recirculation position - until the crack(s) have been sealed and do not lose water. A minimum of 24-48 hours is estimated
Mark the water nivel of the pool, spa, etc. Check for 2 or 3 days that the water nivel does not go down, thus checking its repair
Once the crack(s) have disappeared, put the filtration system in the "filtration" position (after reinstalling the filter elements that have been removed during the repair of the leak).
The treatment may be repeated if a total repair of the fissure(s) has not been achieved.
