Plasmor 5 Liters Additive Plasticizer

Plasticizing additive for mixtures by air occlusion in the dough. Useful for lifting brick walls, blocks, etc. Also for plaster or rendering. Improves the workability of mortars, without the need to add lime. It produces microbubbles that lubricate the mortar. Increases yield by increasing mortar volume from 10% to 15%. It confers greater resistance to the freeze-thaw cycle. This additive is an additive that improves the adhesion of the mortar to the masonry. In precast products, it reduces the setting time, increases the cohesion of the mass and prevents the breakage of the sharp angles.

Features & Applications

• Lifting of brick walls, blocks, etc. (Mortars 1:7 to 1:9).
• Plastering or rendering (mortars 1:4 to 1:6).
• Improves the workability of mortars, without the need to add lime.
• It produces microbubbles that lubricate the mortar.
• Increases yield by increasing the volume of the mortar from 10% to 15%.
• It confers greater resistance to the freeze-thaw cycle.
• Increases the adhesion of the mortar with the masonry work.
• In precast products, it reduces the setting time, increases the cohesion of the mass and prevents the breakage of the sharp angles.

How to use

Add 125 ml to 250 ml of PLASMOR per bag of cement to the kneading water.