Prefabricated rectangular niche for bathroom of 30.5x50.8x8.9 cm

Prefabricated rectangular niche for bathroom of 30.5x50.8x8.9 cm if installed vertically. It can also be installed horizontally.

Important:

When using a niche with an intermediate spacing, you should take into account: First, position the shelf and mark this position at the bottom of the shelf directly above the niche. Install the front and side liner underneath the shelf by the thin-film method. For the installation of the shelf, adhesive cement must be used on the side walls and on the back of the shelf. Rest the shelf on the previously installed bottom liner. Recommendation: in areas with a high presence of water, it should be installed on the shelf on a slope to prevent stagnant water. Alternatively, you can lay the ceramic on a slope with the help of a thin-layer adhesive. In this way, we will avoid the accumulation of water after use

Schlüter-KERDI-BOARD-N are prefabricated construction elements from KERDI-BOARD for the construction of niches and racks in wall areas of all kinds.

In combination with the Schlüter-KERDI waterproofing system, a fully waterproofed niche can be built. It is possible to apply other types of extensible coatings on the panels with a spatula or suitable plasters, although a coating with ceramic tiles is normal.

It is made of rigid extruded XPS foam with a thickness of 12.5 mm. The upper part of the product is covered by a reinforcement layer of a material without cementitious components and with a geotextile coating suitable for mechanical anchoring of the adhesive, extensible coatings applied with a spatula or suitable plasters. The niche has a grid surface on one side to facilitate cutting with a printed grid of 10 x 10 mm.

It is waterproof and resistant to the chemical aggressions to which ceramic coatings can be habitually exposed