Fila W68 - Waterproofing

• It waterproofs all types of mud and unpolished natural stone pavements (ideal for sandstones, slates, aged marble, limestone, etc.) without altering the tone, colour or appearance of the material.
• Also ideal for protecting against stains on extruded stoneware outdoor floors.
• It is suitable for both indoor floors and exterior surfaces On indoor floors it also acts as a base for the next application of a liquid finishing wax (e.g. FilaMatt, FilaLonglife, etc.).
• Also ideal for protecting against stains on extruded stoneware outdoor floors.

• Mud
• Extruded stoneware
• Unpolished stone
• Granite
• Aged marble
• Hydraulic Mosaic

• Natural effect: does not alter the appearance.
• It is a water-based product: the treatment is more environmentally friendly and drastically reduces the waiting time between the initial cleaning and its application.
• It does not create surface films.
• It does not alter the frost resistance of fired clay.
• Verified by the Center
• Ceramico di Bologna.
• Excellent even on cement surfaces.

No dilution: ready for use.

Application:

1. shake the container before using the product and apply FilaW68 directly to clean, dry pavement, evenly and generously without leaving puddles FilaW68 is applied with a large brush or other similar applicator.

2. After 4 hours of application on highly absorbent materials, it is advisable to apply a well-stretched second coat.

The day after the application of the Fila W68 product, and only on indoor floors, the treatment is concluded by applying two coats of one of the Fila liquid waxes (e.g. FilaMatt, FilaLonglife, etc.).

Maintenance:

Diluted solution of FilaCleaner.

One litre of product can be used to treat:

Fired clay 5/10 m2
Tuscan Cotto 15/20 m2
Stone 10/20 m2