Salvaterrazza - Waterproofing

• It waterproofs cracks and fissures up to 1 mm thick, preventing water seepage and consequently the deterioration of materials.
• Ideal for protecting terraces, roofs and preventing leaks.
• It penetrates deeply, consolidating the material.
• In materials with little absorption, Salvaterrazza slightly revives their tonality.
• Protects joints, even cracked ones.

• Mud
• Extruded stoneware
• Porcelain stoneware
• Unpolished stone
• Terrazzo
• Granite
• Aged marble
• Hydraulic Mosaic
• Cement

• Salvaterrazza eliminates the problem of water leaks that create mold, efflorescence and, with the action of frost, other damage to the structure.
• The product penetrates into the crack or fissure, chemically bonding with the material and giving it greater compaction.
• Salvaterrazza does not create a surface film, it prevents water from penetrating the interior of the material, allowing it to breathe.

• It does not alter the appearance, tone, or texture of the material.
• It does not create surface films.
• Being a product of penetration, its duration is very high.
• It is certified "as an ideal product since after its correct application it does not represent a danger of toxicity due to contact with  food".
• It is also excellent on tables and windowsills.
• Ready to use: does not dilute.
• Protects the material against all types of organic stains (food, drinks, greases, etc.).

Ready to use: does not dilute.

Application:
Clean the floor with the PS/87 Fila degreasing detergent. With very dry pavement, apply the product with a large brush, spreading it evenly over the entire surface, impregnating joints and cracks well. Then remove, within 5 minutes, the excess product that has not penetrated, with absorbent paper or with a cloth, drying the surface completely! On high absorption materials it is advisable to apply a second coat, after 24 hours.

Attention
The product slightly revives the tone of the materials, perform a test beforehand on a small area of the surface.

One litre of product can be used to treat:

10-15 m² depending on surface absorption.