10mm diameter scoring wheel for manual cutter

The 10mm diameter scoring wheels for manual cutter and SILVER rollers from RUBI, are made of sintered tungsten carbide.

Each roller guide is individually rectified so that each diameter has an incision angle according to its function and use. Each roller guide diameter offers different results and performances, depending on the type of ceramic material.

The high resistance to wear offered by RUBI carbide rollers guarantees the professional a life and quality of finish that meets expectations. For the correct functioning of SILVER scoring wheels and rollers, the scoring must always be continuous and homogeneous, without excessive pressure or unnecessary passes.

Adapting the diameter of the roller guide and the way of scratching with each type of material will always guarantee the best results.

SILVER RUBI scoring wheels and rollers are suitable for scratching and subsequent separation of ceramic tiles of any type: tile (BIII), glazed stoneware (BIb - BIIa), rustic or extruded stoneware (AIb - AII) and of course porcelain stoneware (BIa), with low to medium cutting difficulties.

SILVER scoring wheels and rollers have been designed, mainly to work with ceramic materials that have glazed or natural surfaces with smooth and/or slightly rough finishes.

The handles of the SILVER scoring wheels have a triple fluted geometry (design and RUBI patent), to ensure correct mounting on the manual cutter, as well as a firm and firm and vibration-free fixation and scratching. Forming the best combination to always obtain the best results.

The SILVER scoring wheels are available in two formats, allowing them to be adapted to the entire range of manual cutters RUBI.