Fasteners for Danodren film

Fixings for Danodren H15 and H15 Plus foil. Includes head protector for the binding. Method of use They are placed along the sheet every 30 cm and on the overlaps of the sheets.

How to use

Preparation of the support:

• The surface of the base support must be resistant, uniform, compact and dry.
• The singular points must also be prepared before starting the installation of the geotextile: chamfers or straps in meetings with vertical walls, reinforcements, joints and other singular points.

Geotextile Placement:

• Once the ground or support is leveled, the roll of DANOFELT PY 120 is extended. The second roll is then assembled, leaving a minimum overlap of 20cm. Depending on its final application, it is recommended to fix the joint by sewing or stapling.
• The pouring of the materials must be done without damaging the geotextile. In the same way, the spreading of the different layers will be carried out in such a way that the extension and compaction equipment does not circulate at any time on the surface of the geotextile, and always in such a way that the direction of advance of the extension machinery of the upper layer is carried out in such a way that it does not affect the overlap of the geotextile layers.