The Wedges for the Peygran system (Bag of 300 units) serves to avoid possible damage when the tiles are laid, also reducing the time it takes to install them. In this case, we find reusable wedges for the Peygran system. Each bag contains 300 reusable wedges.
How many wedges do I need?
It depends a little on the progress you want to make at once. At least that it is done in one day, since it has to be allowed to dry, that the setting is already done and the leveling function is already done, it will be about 4 meters. So we recommend covering enough wedges for this surface.
The amount depends on the size of the tile. Based on this data, the amount per meter appears in the following table.
How many pieces (bases) would you need per m2?
Very easy, just look at the table and you will know how many you need. It depends on the dimensions A and B of the ceramic tile you are going to install. For example, if the tile measures 45 x 30 cm on each side, you will need 30 pcs per square meter. You should keep in mind that foundations are not reusable and wedges are.
HOW TO USE
Bracket placement:
After spreading the cement glue, place the supports under the pieces on all 4 sides.
For large parts use one or more supports per side.
Place the tile and hit with the rubber mallet.
Insertion of the wedges:
Insert the wedges into the housing by squeezing without exceeding the breaking point.
To facilitate this task, the use of the adjustable traction clamp is recommended.
Removal of the support:
Once the glue cement has set, to tear off the support simply tap with the rubber mallet or with the tip of your foot in the direction of the joint.
