Bonding band for artificial grass

Polyester and polyurethane bonding band for the bonding of artificial grass. The artificial grass bonding band is a fundamental element for a quality installation. Using a poor quality bonding band can cause serious damage to an artificial grass surface. If the adhesion of the band with the adhesive is not good or is not well insulated from moisture, the joints will peel off very quickly. If the strength is not adequate, with traction, turf dimensional variation forces and use, the bonding band will break. And if this bond band is not dimensionally stable, it will generate wrinkles all over the surface. For all these reasons, the choice of a quality and appropriate bonding belt for each type of use is of vital importance. Our bonding band is made from a white polyester yarn coated on one side with polyurethane. It has a thickness of 0.60 millimeters, and a width of 20 cm. The length of the band can be 50 or 100 meters.

How to use

The use of the bonding band is really simple. The polyurethane-coated side, satin or glossy side, will be brought into contact with the floor. The matte and rough side will be the part that is facing up. The adhesive glue will be poured over it.