High bases for Peygransystem stone
Calculate your shipping costs
Select zone and quantity
Basis for the Peygran system
1 mm thick bases, which allow minimum joints and tile thicknesses up to 30mm. The chock has been designed for the installation of stones, granite, marble and any piece with a thickness between 17 and 30mm. It offers greater resistance than the normal chock to be able to adjust formats as heavy as these. For measurements between 16 and 19 mm, we will use it together with the supplement, so that the wedge fits more closely to the center of the base and makes a more uniform pressure on both sides of the joint. The bases are not reusable.
How many pieces would you need per m2?
Very easy, just look at the table and you will know how many you need. It depends on the dimensions A and B of the ceramic tile you are going to install. For example, if the tile measures 45 x 30 cm on each side, you will need 30 pcs per square meter. You should keep in mind that foundations are not reusable and wedges are.
HOW TO USE
Bracket placement:
After spreading the cement glue, place the supports under the pieces on all 4 sides.
For large parts use one or more supports per side.
Place the tile and hit with the rubber mallet.
Insertion of the wedges:
Insert the wedges into the housing by squeezing without exceeding the breaking point.
To facilitate this task, the use of the adjustable traction clamp is recommended.
Removal of the support:
Once the glue cement has set, to tear off the support simply tap with the rubber mallet or with the tip of your foot in the direction of the joint.
| Product | High bases for Peygransystem stone |
| Brand / Manufacturer | Peygran |
| Difficulty | Beginner |
