The RUBI spacers are undoubtedly a truly indispensable range for obtaining perfect finishes in any ceramic tile installation job. RUBI makes the spacers for joints with a high-quality base material and, for this reason, they do not have any imperfections or burrs. The spacers for 1, 1.5, 2 and 3 mm joints are recommended for the installation of ceramic tile wall and floor tiles with minimal joint. The solid structure of the spacers for 1, 1.5, 2 and 3 mm joints has been designed to provide greater resistance to bending and crushing. These properties make spacers for 1, 1.5, 2 and 3 mm joints highly recommended for large-format ceramic tile cladding. The L (long) versions of the 2 and 3 mm spacers are perfect for both wall tiles and floors with large-format or rectified ceramic tiles with thin joints. The internal geometry of the spacers for 3 mm long and 4 mm joints has been designed to provide greater resistance to bending and crushing. These properties make the spacers for long 3 mm joints highly recommended for large-format ceramic tile cladding. The internal geometry of the spacers for 5 to 12 mm joints is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent crushing. This hollow design facilitates the entry of the joint mortar and, if the type of installation allows it, leave the spacer inside the installation joint without this affecting the integrity of the joint in the future. The 5 mm reinforced RUBI spacers are spacers with greater rigidity, specially designed for use on large-format tiled floors. The underside of the reinforced 5 mm spacers is designed to provide a good slump in the gripping material and to make it easier, if the type of installation permits, for the spacer to remain inside the installation joint without affecting the integrity of the joint in the future. The professional installer is well aware of the importance of using high-quality spacers, since the finish of your work can be seriously deteriorated due to imperfections and irregularities. The spacers RUBI stand out for the regularity of their production, the homogeneity of measurements and the absence of burrs and any other small defects. These particularities allow professionals who rely on spacers, tees and wedges RUBI obtain excellent finishes with total precision. RUBI is committed to quality. All our products and tools are subjected to rigorous quality tests by experienced professionals. We want all the products we have on the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the ceramic tile and construction installation professional.https://www.rubi.com/en/crossheads-for-joints-r730 Crosshead for wall and floor tiles with minimal joint. Quality base material, without impurities or imperfections. Crosshead for coatings. Spacer for pavements with thin joint. Crosshead for large format and rectified ceramics. Redesigned internal geometry. Increased resistance to bending and crushing. Ideal for vertical cladding with large formats. Pavement cross. Ideal for large formats. Hollow structure with internal reinforcements. It withstands stresses and allows the gripping material to enter. Spacer with greater rigidity, specially designed for use in large-format tile coverings. Quality base material, without impurities or imperfections. Bottom face designed for good seating in the grip material. Crosshead for rustic or industrial floors. Crosshead for large and rustic format.