The Andromeda Stone Cover shower tray with a rectangular shape and dimensions 120x80 combines elegance and comfort, adaptable to any bathroom space and design. Its stone texture, cappuccino color and hidden cover grid in the same finish as the shower tray give it an unbeatable design to make bathrooms more integral and minimalist by covering the entire drain area.

Characteristics:

• 5-year warranty
• Antibacterial
• Antiskid
• With drain valve
• Acrystone®

Acrystone® resin shower trays are characterized by their high resistance to stains and their ease of cleaning.

Drain valve included model 6961.875 Viega:

• Removable siphon
• Nivel of siphon water 50 mm
• Evacuation flow rate of 0.64 l/s
• Removable cleaning basket

How to clean a resin shower tray?

Cleaning the shower is one of the most widespread concerns and a very frequent question. In addition to seeking to preserve the materials aesthetically as new, we are concerned about the hygiene of bathroom spaces, which are especially sensitive to the proliferation of mould or microorganisms.

Acrystone® resin shower trays are designed under a high standard of durability, as well as being antibacterial. The formulation of its material facilitates routine cleaning and hygiene in a simple and almost effortless way.

How to remove traces of cement, glue or mortar after installation?

Once the plate is installed, traces of cement, glue or mortar may remain. To remove these possible materials, use joint descaler or cement remover, and avoid rubbing directly on the plate so as not to scratch it.

How to carry out routine cleaning of an Acrystone® resin shower tray?

After each use, cleaning with water should be carried out and ensuring good ventilation of the bathroom.

For routine cleaning of the resin shower tray, it is recommended to do it by using water, neutral liquid cleaners and soft cloths or non-abrasive sponges, always avoiding scouring pads that can damage the surface of the tray. It is important not to mix different products in cleaning.

Likewise, as part of the maintenance tasks of the shower tray, the grille must be cleaned periodically to avoid soap or limescale residues. To do this, we must remove it from the plate and clean it with a specific product for stainless steel.

If you use hair dyes, rinse the shower tray with soap and water once the shower is over.

How to remove limescale from the shower?

Periodically, we must clean the limescale residue from our shower. We can use specific domestic anti-limescale products and proceed as follows:

1. Remove the drain grate and apply the anti-limescale with a damp cloth to the entire surface of the tray.
2. Leave the product on for 15 minutes. After this time, rinse with water.
3. Place the rack in place and rinse the dish again.

How to remove stubborn stains on a resin shower tray?

Although the material is developed to prevent the appearance of stains, sometimes it is necessary to carry out specific cleaning beyond the usual maintenance. If you need to remove stubborn stains, we have a tough stain cleaning kit for Acrystone® resin shower trays. The perfect ally to return the material to its origin.

The kit contains a brush, gloves, a sponge and the instruction manual that we must follow step by step.

Instructions that we must follow step by step:

• Step 1: Remove the drain grate and clean the dish with soap and water by rubbing with the brush.
• Step 2: Rinse the entire surface with plenty of water.
• Step 3: Clean the entire surface of the dish with a damp cloth and with the appropriate cleaning product for the type of stain (lime, cement-glue for tiles, grease, soap residue, etc.).
• Step 4: Keep the cloth damp with the cleaning product on the most affected area and leave the product on the stain for 15-20 minutes. After this time, remove the cloth and rub with the brush.
• Step 5: Rinse with water. If there are imperfections, repeat step 3.
• Step 6: Once the stains are removed, clean the dish with soap and water by rubbing with the brush.
• Step 7: Place the rack in place and rinse the dish again.