C2TE flexible porcelain cement glue

Flexible cementitious adhesive for mixed binders for the collation of interior and exterior floors, interior cladding and skirting boards. Especially recommended for the placement of rectified and new pavement on old pavement. For gluing all types of ceramic pieces, marble and granite. Suitable for plasterboard, Knauf and Pladur type interiors.

Composition

Product based on high-strength cement, selected aggregates, additives and synthetic resins that guarantee high grip strength, good workability and resistance to aging.


Features & Applications

- Application indoors, outdoor pavements and skirting boards.
- Adhesion of all types of ceramic pieces.
- It avoids having to moisten parts or supports thanks to its water retention power.
- No hanging. Excellent initial adhesion.
- High open time, allows the rectification of parts.
- Guarantees adhesion and correct setting with low porosity materials such as porcelain stoneware.
- Product recommended for the placement of grinds.


Stands

- Conventional cement-based supports.
- Plasterboard-plasterboard interiors (Knauf or Pladur type).
- Ceramic flooring.
- The supports must be resistant, stable, healthy and clean, free of dust, remains of release agents, organic products, etc.
- All supports must be of the appropriate flatness. If not, make screeds of up to 5 mm with the same product 48 hours before gluing. For greater thicknesses, use traditional dry mortars or leveling paste.
- In case of heat, wind or on highly absorbent supports, it is advisable to moisten the support and wait for the water film to disappear.
- Do not apply on plasters, paints or easily disintegrating pieces.
- On ceramic floors, remove the badly adhered pieces and fill the gaps with mortar the day before the application of the product.


How to use

- Add water and mix manually or mechanically to a homogeneous and workable consistency.
- Let the dough rest for about 5 minutes and knead.
- Spread the kneaded product on the support with a trowel in a maximum extension of 2m2.
- Comb with a notched trowel to adjust the thickness (see box).
- Place the pieces by pressing and moving until the grooves are completely flattened and their entire surface adheres correctly.
- Respect the construction joints (expansion, contraction, fractionation, perimeter corner joints) and the joints between plates (minimum 2 mm).
- The joints will be filled after 24 hours on vertical walls and 48 hours on pavements. Use the appropriate mortar from the MORCEMCOLOR range, depending on the type of joint.

NOTE: The shorter the time between styling and tile placement, the better results will be obtained.