Pegoland Fix White D1 6 Kg

Features & Applications

• Ready to use. Do not add water.
• Very flexible.
• Special for use on deformable supports.
• Special for tiling on plasterboard.
• Placement of polystyrene sheets on mortar.
• Spot gluing of insulating panels.
• Tiled on dry plaster and in good condition.
• Tiled on surfaces painted in good condition.
• Gluing of exhibitions on wood.
• Glued over old tiles in good condition.
• Not suitable for floors.

Stands

• The supports must be flat, consistent, clean, free of dust, loose particles, remains of paints in poor condition and whitewashed, oils and release agents.
• It is very important that the supports are dry at the time of application.
• The support must be fully set and stable.
• For greater thicknesses, regularization mortars with adequate tensile strength and with the curing retractions already completed should be used.

How to use

• Stir PEGOLAND® FIX until completely homogenized.
• Spread on small cloths by adjusting the thickness with a sawtooth trowel of 4 mm. maximum.
• Place the pieces on the fresh adhesive, pressing and moving until the grooves are completely flattened and the entire surface of the ceramic is correctly adhered.
• Respect the construction joints (expansion, contraction, fractionation, perimeter corner joints) and placement between tiles, minimum of 2 mm.
• Grouting after 24 hours. Use the appropriate mortar from the MORCEMCOLOR range, depending on the type of joint.