English
Waterproofing acrylic rubber
13,95 € VAT incl. 21%
Calculate your shipping costs
Select zone and quantity
Waterproofing acrylic rubber
67,23 €
-10%
33,01 €
-10%
42,25 €
-10%
17,96 €
-10%
15,56 €
-10%
9,89 €
-10%
Table of Contents
It is an elastic coating based on an aqueous dispersion of acrylic copolymers with a very low residual tackiness in the dry film, which allows it to follow the expansion and contraction movements of the surface where it has been applied, as well as excellent water resistance and impermeability. With high adhesion, it can be applied on a large number of surfaces, such as cement, concrete, plaster, brick, iron, steel, galvanized steel, aluminum, etc., not passable or not very passable, ensuring permanent watertightness.
It is an elastic coating based on an aqueous dispersion of acrylic copolymers with a very low residual tackiness in the dry film, which allows it to follow the expansion and contraction movements of the surface where it has been applied, as well as excellent water resistance and impermeability.
With high adhesion, it can be applied on a large number of surfaces, such as cement, concrete, plaster, brick, iron, steel, galvanized steel, aluminum, etc., not passable or not very passable, ensuring permanent watertightness.
Recommended as a waterproofing for roofs and roofs to prevent water leaks.
HOW TO USE
- ON CEMENT, CONCRETE, PLASTER, ETC:
Carefully sweep these surfaces to remove dust, sand, and loose or poorly adhered particles Fill cracks using a mixture of 2 to 3 parts sand and 1 part Acrylic Rubber UNAPLAST. The slits and small grooves susceptible to movement must first be covered longitudinally with strips of polyurethane foam 2 mm thick and using Acrylic Rubber as an adhesive UNAPLAST.
- ABOUT POLYURETHANE FOAM INSULATION:
Remove dust, sand and surface contamination. IRON, STEEL: Remove dust, surface contamination, etc. and apply a layer of electrolyte minium.
- ON TILE OR CERAMIC TILES
Carefully sweep these surfaces to remove dust, sand, and loose or poorly adhered particles Fill cracks using a mixture of 2 to 3 parts sand and 1 part Acrylic Rubber UNAPLAST. Apply one layer of rubber, let it dry and apply another in a different direction from the previous one (perpendicular).
CHARACTERISTICS
- SPECIFIC WEIGHT: 1.1kg./liter
- Yield: 2.5m2/kg.
- Color: Red
- Solids volume: 55%
- Finish: Semi-gloss
- Flash point: non-flammable.
- Drying to the touch: Approximately 1 hour at 20ºC
- Cleaning equipment: Water, before the paint dries.
- Repainting interval: Minimum, between 4 and 8 hours, depending on ambient temperature. Maximo, he doesn't have.
- Application method: Brush, roller and airless.
- Thinner: Water, only for the first hands and a maximum of 5%.
- Recommended thickness: According to specification. Never apply at room temperature or substrate below 7 to 10º. Neither when rain is forecast, nor in areas of closed fog.
- Storage: Preserve containers from frost. Avoid direct exposure to the sun.
| Product | Waterproofing acrylic rubber |
| Brand / Manufacturer | UNAPLAST |
Reviews for Waterproofing acrylic rubber
Do you need to know anything else?
What do you want to know about this product?
Pay with seQura
Receive your purchase and pay later or split your payment with seQura
- Receive it first and pay later at no cost.
- Split your purchases into 3 payments at no cost.
- Or pay in 6, 12 or 18 months with total flexibility.
Pay in 3 interest-free instalments with PayPal
What do I need to do to pay in 3 interest-free installments with PayPal?
- Select PayPal as your payment method at checkout.
- Choose the "Pay in 3 installments" option in the PayPal payment gateway.
- You will receive a response to your request after a few seconds.
- No interest. Automatic payments.