Morcemsec Thin Layer CR CSIV W2 5Kg

Dry mortar for finishing facades, interiors, patios, etc. Impervious to rainwater and permeable to water vapor. For plastering and masonry works in general.

Features & Applications

• Making white finishes.
• Indoor and outdoor application.
• Waterproof coating.
• Permeable to water vapor, allowing the support to breathe.
• Excellent adhesion and great plasticity.
• Plastering over rendering or application in two layers.
• Thicknesses of up to 1 cm without sagging.
• Smooth or troweled finish.

Stands

• Conventional cement-based and brick-masonry supports.
• The supports must be resistant (minimum resistance CSIV), stable, healthy and clean, free of dust, remains of release agents, organic products, etc.
• In case of heat, wind or on highly absorbent supports, it is advisable to moisten the support and wait for the water film to disappear.
• On non-porous substrates, apply a primer (IMPLAFIX) or improve the roughness by mechanical means.
• Do not apply to plasters or paints.

How to use

MECHANICAL APPLICATION

• Establish, depending on the chosen machine (hose section and length) and the external weather conditions, the optimal water/mortar ratio. Start from 20% and gradually modify it until you get the right consistency.
• It is important to keep constant the variables that can affect the characteristics of the mortar applied (distance to the wall, angle of application and proportion of water).

MANUAL APPLICATION

• Add water and mix manually or mechanically to a homogeneous and workable consistency.
• Spread the kneaded product on the stand with a trowel.
• Let the necessary time elapse and trowel.