Paviland Primer R 5Kg

Paviland Primer R 5Kg, Primer as adhesion promoter for Grupo Puma cementitious pavement systems, indoors and outdoors. Its high penetration power in the substrate allows it to act both as a sealant of the substrate and as an adherent primer.

Features & Applications

• Adhesion promoter for the range of cementitious flooring systems of Grupo Puma.
• Suitable for indoors and outdoors.
• Adherent on all types of mineral supports for the subsequent application of any cementitious mortar.
• Support sealant: regulates its absorption, avoiding or reducing the appearance of air bubbles in the self-leveling coating.
• Paviland Primer R increases the cohesion of the support.
• Increases durability.
• Resists the alkaline pH of the support.

Stands

• Suitable for cementitious substrates: concretes, cement mortars, etc. Also for anhydrite supports.
• The substrate must be dry or slightly damp, never waterlogged.
• The application base must be free of all types of contaminants, such as oil, grease, coatings, surface treatments, etc.

How to use

• The PAVILAND PRIMER R will be diluted on site, depending on the porosity of the support, in the following proportions (PAVILAND PRIMER R: water): 1:4 on low-porous supports (one coat), 1:3 on medium-porosity substrates (1 or 2 coats) and 1:2 on porous supports (2 coats).
• The PAVILAND PRIMER R is applied by brush or roller or even designed with airless systems. The material will be spread out so that there are no waterlogged areas. For use with a spray system, tests must be carried out to ensure applicability.
• Before the application of Grupo Puma cementitious flooring systems, it is advisable to apply the diluted product depending on the absorption of the substrate, and the last coat should be allowed to dry for at least 1 hour or even longer in case of low temperatures or high humidity.
• Once the last coat of PAVILAND PRIMER R has dried, we must apply the cementitious flooring systems of Grupo Puma within the following 24 hours.

Consumption