Pumaplast Ready to Use 5Kg Bottle

Powder plaster for plastering, smoothing, covering cracks, scratches, holes, etc., ideal for plastering plasticized stipple surfaces.

Features & Applications

• For general use indoors on supports such as: plaster, plasterboard, plasterboard, mortars, concrete, old paintings, etc.
• Smoothing and leveling of plasticized gotelé.
• Filling of small defects, holes, scratches, fissures, cracks, etc.
• Fine, hard and high whiteness finish, suitable for receiving any type of plastic paint, wallpaper, etc. Finishing Nivel : Q4.
• Easy preparation and application with trowel or spatula.
• Easy sanding and minimal waste.
• It reduces the absorption of supports, increasing the performance of paints.
• Good adhesion.
• Allows fresh-on-fresh application.
• Manual or projectable application.

Stands

• The supports must be free of dust, grease, waxes, etc.
• The remains of poorly adhered paintings must be removed.
• Highly absorbent substrates should be pre-treated with a fixative or primer.
• Do not apply on icy, very hot, wet or high moisture substrates.

Employment Mode

• Mix 1 kg of product on 0.5 L of water and add small doses of water until you find the ideal working point, and achieve a homogeneous and consistent paste.
• Mixed manually or with a mixer that does not exceed 500 rpm.
• Apply with a stainless steel trowel or spatula.
• Clean tools with water right after use.

Approximate yield: 1m2/kg per mm. thickness