MonoTop 107 Seal Sika waterproofing mortar

Waterproofing mortar for a large number of uses, single component, semi-flexible, with excellent adhesion on healthy and clean substrates.

Uses:

It can be used with or without reinforcement, on concrete, mortar, stone, fibre cement supports and is suitable for:

• Waterproofing of tanks, swimming pools, canals, etc.
• Interior waterproofing in basements.
• Exterior waterproofing of buried walls.
• Repair and protection of surfaces exposed to the action of ice and de-icing salts: bridge parapets, terrace and roof overhangs, cornices, etc.
• Protection of concrete structures in marine environments.
• Waterproofing of drinking water tanks.
• Sika MonoTop-107® Seal can be used for the protection of concrete structures:
• Suitable for protection against penetration (Principle 1, method 1.3 of UNE-EN 1504-9).
• Suitable for humidity control (Principle 2, method 2.2 of UNE-EN 1504-9).
• Suitable for increasing resistance (Principle 8, method 8.2 of UNE-EN 1504-9).

FEATURES / BENEFITS

• Easy mixing and application.
• Excellent adhesion on healthy support.
• Waterproof to water. Permeable to water vapor.
• High resistance to ice and de-icing salts.
• Good ozone resistance.
• Slightly flexible in relation to a normal mortar.
• Slows the progression of carbonation.
• It does not attack armor or metal elements.
• It is non-corrosive, non-flammable, and non-toxic.

Mix Ratio: Approximately 4.5 liters of water per 25 kg bag

Consumption:

Minimum 2 coats are required. It may be necessary to reach up to 3 layers in areas of extremely strong filtration.

As indicative data:

For frost protection: 2 kg/m2 and layer.

For waterproofing; Depending on the height of the water column:

• With H < 1 m.: up to 1.5 kg/m2 and layer.
• With H > 1 m.: up to 2 kg/m2 and layer.

The maximum consumption per layer should not exceed 4 kg/m2 (2 mm thick).