Morfex refractory mortar 25kg

Refractory mortar for placing refractory bricks and plasters in fire environments. Made from special cements, selected aggregates and additives. 25Kg. bags of laminated paper. Storage up to 6 months in original closed container, protected from weather and humidity.

Features & Applications

• Erection of chimneys, barbecues, ovens, etc.
• Plastered in high temperature environments. (1200ºC).

Stands

• The supports must be resistant, stable, healthy and clean, free of dust, remains of release agents, organic products, etc.
• In case of heat, wind or on highly absorbent supports, it is advisable to moisten the support and wait for the water film to disappear.
• Do not apply to plasters or paints.

How to use

• Add water and mix manually or mechanically to a homogeneous and workable consistency.
• Build the brick factory according to the traditional system.

Precautions and recommendations

• Do not apply below 5ºC or above 30ºC.
• Do not apply with risk of frost, rain, strong winds or direct sun.
• In extreme weather conditions (high wind or high temperatures) it is necessary to gently spray the product the day after its application.
• Commissioning 7 days, heating gradually.

Technical data

(Statistical results obtained under standard conditions)

Note

The instructions for how to use are made according to our tests and knowledge and do not imply any commitment. They do not relieve the consumer of the examination and verification of the products for their correct use.

The company's liability shall be limited to the value of the goods used. Claims must be accompanied by the original packaging to allow for proper traceability.